PRE INSULATED PIPE
Ricwil manufactures preinsulated pipes for chilled water, hot water, steam, skin effect current tracing system; polyurethane sectionals and slabs; galvanised steel, aluminium, stainless steel and spiral round duct.
RICWIL’S Lo-Temp Hi-Gard piping system is the highest quality, most efficient and dependable method of providing for above-ground distribution of fluids at temperatures up to 130°C. Lo-temp Hi-Gard is prefabricated to improve quality and save labor, the Lo-Temp Hi-Gard piping system is completely preinsulated to satisfy insulation and jacketing needs for all above-ground applications, indoors and outside.
RICWIL’S Mid-Temp Hi-Gard piping system provides superior BTU savings in addition to an efficient, high quality, labor-saving method of providing for the distribution of fluids above-ground at temperatures of 130°C and above. A combination of calcium silicate and polyurethane insulation makes BTU savings possible. These savings are extremely desirable in electric-traced applications where every BTU saved lowers electrical equipment material cost and adds to lifelong savings in power usage.
TERRA-GARD™ is an underground piping system for distribution of hot or chilled fluids at temperatures up to 130°C. Every actionac.net system is pre-engineered and factory tested before shipment. Carrier pipe is supplied in customer’s choice of materials which include steel, copper, stainless steel, aluminium, polyvinyl chloride (PVC), and fiberglass reinforced plastic (FRP). PVC or H.D.P.E. jacketing is standard, but customer can also specify jacketing of fiberglass reinforced plastic. Terra-Gard is shipped in 6 meter or 12 meter random lengths, with 130-150 mm of carrier pipe exposed at unit
Copper-gard Pre-insulated copper pipe shall be factory fabricated using a Single Machine-Injected System for Polyurethane Foam.
RICWIL Copper-Gard pipe is a completely factory fabricated, insulated and jacketed copper piping system for distribution of domestic hot water and Refrigerant gas lines. Copper-Gard consists of 2 copper tubes insulated with rigid polyurethane foam which is protected with outer Jacket.